
• High conversion efficiency resulting in superior power output performance
• Outstanding power output even in low light conditions
• Optimized design for ease of soldering and lamination
• Long-term stability, reliability and performance
• Low breakage rate
• Color uniformity
Characteristics
Download
Appearance:
Dimension |
156.75mm±0.25mm; |
Diagonal |
φ220.2mm±0.5mm; |
Silicon model |
Mortar, diamond wire |
Thickness |
220μm±20μm |
Front |
Texture by acid etching, blue silicon nitride anti-reflection coatings,5 silver busbar, 0.7 mm silver busbar |
Back |
Full-surface aluminum back-surface field, 1.6±0.2mm ( silver / aluminum )discontinuous soldering pads |
Production and Quality control:
- Precision cell efficiency sorting procedures;Stringent criteria for color uniformity and appearance;Reverse current and shunt resistance screening;ISO9001,ISO14001 and OHSAS 18001 certified
Drawings:
Electrical Performance:
Gear |
Conversion efficiency rating(%) |
Pm(W) |
Voc(V) |
Isc(A) |
Vm(V) |
Im(A) |
19.0 |
≥19.00 |
4.67 |
0.636 |
9.139 |
0.542 |
8.621 |
18.9 |
≥18.90~19.00 |
4.64 |
0.635 |
9.132 |
0.540 |
8.611 |
18.8 |
≥18.80~18.90 |
4.62 |
0.633 |
9.127 |
0.537 |
8.606 |
18.7 |
≥18.70~18.80 |
4.59 |
0.633 |
9.117 |
0.535 |
8.579 |
18.6 |
≥18.60~18.70 |
4.57 |
0.632 |
9.080 |
0.534 |
8.558 |
18.5 |
≥18.50~18.60 |
4.55 |
0.631 |
9.038 |
0.533 |
8.537 |
18.4 |
≥18.40~18.50 |
4.52 |
0.630 |
9.024 |
0.533 |
8.485 |
18.3 |
≥18.30~18.40 |
4.50 |
0.628 |
8.94 |
0.532 |
8.454 |
18.2 |
≥18.20~18.30 |
4.47 |
0.627 |
8.901 |
0.531 |
8.436 |
18.1 |
≥18.10~18.20 |
4.45 |
0.625 |
8.884 |
0.529 |
8.412 |
18 |
≥18.00~18.10 |
4.43 |
0.624 |
8.875 |
0.528 |
8.390 |
17.9 |
≥17.90~18.00 |
4.40 |
0.622 |
8.865 |
0.526 |
8.365 |
17.8 |
≥17.80~17.90 |
4.38 |
0.621 |
8.851 |
0.524 |
8.359 |
17.6 |
≥17.60~17.80 |
4.33 |
0.618 |
8.62 |
0.551 |
7.858 |
*Test condition : AM1.5, 1000W/m2 , 25℃. Average accuracy of all tested figures is ±1.5% rel;
Temperature coefficients:
Current temperature coefficient |
α(Isc) |
+0.06 %/℃ |
Voltage temperature coefficient |
β(Voc) |
-0.36%/℃ |
Power temperature coefficient |
γ(Pmax) |
-0.36%/℃ |
*Test condition : AM1.5, 1000W/m2 , 25℃;
Solderability:
Peel strength |
≥1.5N/mm |
The above can be obtained by soldering iron an 300℃-400℃,with UZON regular flux and ribbon. |
*howeverthis may vary due to different flux, ribbons soldering methods and parameters used by the customers.;
